Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, driver feedback, and tire wear. We use a premium polyurethane formulated specifically for our company to provide minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. The quality of Powerflex products is visible the moment you open the box: premium polyurethanes, detailed moldings, and CNC-machined 304 stainless sleeves. Lube-holding grooves and knurls will ensure the supplied copper-based grease stays in place for extended squeak-free operation

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

- Please confirm anti-roll bar diameter before ordering any anti-roll bar bushings

- PFF36-203-25.5 & PFR36-204-25 fit MPS ONLY

- PFF19-1203-22OE & PFR19-1204-21OE do NOT fit the MPS

- PFF19-801 is for bushings with a 12mm bolt

- PFF19-8011 is for bushings with a 14mm bolt

BC Racing is our most popular suspension package. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke.

'04-13 Mazda 3 SPECS: 7/4 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

'14-16 Mazda 3 SPECS: 8/5 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

Tein Street Basis are great for daily driving and spirited driving. Height adjustable only. SPECS: 7/6 kg spring rate, twin tube, upper mounts not included.

NOTE: Fits all 2004-2009 Mazda3 including Mazdaspeed3. Usually ships within 1-3 business days.

Racing Beat's Mazda 3 Sways Bars reduce chassis roll during cornering and increases your car's sensitivity to steering inputs, thereby improving maximum cornering power. Each kit includes new sway bar bushings & clamps, grease, and installation instructions.

SPECS:

2004-2013 2.5 liter Mazda 3 - Front 28.5mm / Rear 27mm.

2010-2013 2.0 liter Mazda 3 - Front not available / Rear 27mm.

2014-2018 Skyactiv Mazda 3 - Front 28.5mm / Rear 24mm.

Koyo 25mm racing radiator: developed to improve heat dissipation by increasing coolant volume while promoting proper air flow and coolant circulation. In typical fashion, Koyorad engineered this radiator to directly replace the stock OEM radiator for a quick and simple installation. Koyorad has also integrated a 1/8 PT female accessory fitting (supplied with a threaded plug) to accept temperature sensors typically included with most aftermarket temperature gauges. Fits manual transmission models only. Ships within 1-3 business days.

Must use Koyo hyper radiator cap (sold separately). Factory Mazda radiator cap does not fit radiator.

Mishimoto silicone radiator hose sets: direct fit for 2007-2009 and 2010–2013 Mazdaspeed 3. Includes upper radiator hose, lower radiator hose, and expansion tank hose. Includes high-quality worm-gear clamps for ease of installation. Available in black, blue, or red. Mishimoto Lifetime Warranty. Ships within 1-3 business days.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

ENERGY SUSPENSION's HYPER-FLEX ™ is performance polyurethane that delivers an amazing amount of PERFORMANCE to any vehicle that runs with it. Proven on the race track as well as the street, on and off-road, under the most demanding conditions.

Fits 1990-1997 Mazda Miata. Includes front and rear control arm bushings, front and rear sway bar bushings, differential bushings and grease. Available in Red or Graphite (Black) color.

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, driver feedback, and tire wear. We use a premium polyurethane formulated specifically for our company to provide minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. The quality of Powerflex products is visible the moment you open the box: premium polyurethanes, detailed moldings, and CNC-machined 304 stainless sleeves. Lube-holding grooves and knurls will ensure the supplied copper-based grease stays in place for extended squeak-free operation

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

Miata 1989-2005 bushings

MX-5 Miata 2006-Present bushings

Whiteline's "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

Miata NA 1989-1997 bushings

Miata NB 1998-2005 bushings

Miata NC 2005-Present bushings

Fortune Auto 500 series generation 7 (FA500-NA8C) are the best single adjustable system on the market at a very affordable price point. These are perfect for daily drivers that see occasional track use. Modular system - Upgradeable to 2-Way or 3-Way Canister. Built to order. Ships within 5-8 weeks.

500 SERIES SPECS: 8/6 kg spring rate, 24 way adjustable, pillowball uppermount, monotube construction, digressive Piston Technology. Custom spring rates, 4k to 24k, are available with Swift spring upgrade only. Contact us with your rates.

NOTE: NA & NB coilover kits fit all 1990-2005 MX-5 Miatas and NC coilover kits fit all 2006-2015 MX-5 Miatas.

BC Racing is our most popular suspension package. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke.

NA/NB SPECS: 10/8 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

NC SPECS: 7/5 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

ND SPECS: 5/3 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

Tein Street Basis are great for daily driving and spirited driving. Height adjustable only. SPECS: 7/6 kg spring rate, twin tube, upper mounts not included.

Tein Street Advance provides a sporty ride feeling and aggressive stance, along with wide-range damping force adjustment using our new Advance Needle technology, giving the driver a much more noticeable feel in damping force change. SPECS: 7/6 kg spring rate, 16 way adjustable (simultaneous compression and rebound) and EDFC compatible, twin tube, upper mounts not included.

Tein Flex-Z inherits all the features and quality of STREET FLEX but the adoption of new platform allows for a lower price without comprimising quality. SPECS: 7/6 kg spring rate, includes upper mounts w/rubber bushings, 16 way adjustable (simultaneous compression and rebound), twin tube, and EDFC compatible.

Tein Mono Sport offers not only the precise steering feel that strongly appeals to sport-minded drivers, but also the flexible movement. MONO SPORT is set up to let the drivers enjoy the runs on circuits and/or winding roads and everyday driving on streets. SPECS: 10/8 kg spring rate, mono tube construction, includes pillow ball upper mounts, 16 way adjustable (simultaneous compression and rebound), and EDFC compatible.

NOTE: NA & NB coilover kits fit all 1990-2005 MX-5 Miatas and NC coilover kits fit all 2006-2015 MX-5 Miatas.

Usually ships within 1-3 business days.

Whiteline sway bars dramatically improve the grip, handling and performance of your vehicle. Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that's what it's all about. Installing bigger Whiteline Sway bars is still the best dollar for dollar handling improvement you can make.

Whiteline swaybar links are heavy duty and long lasting to ensure the maximum output of the swaybar for improved grip and better handling. Features heavy duty steel ball joint ends that adjust & rotate to any angular combination. Eliminate sway bar preload via the light weight aluminium bodies provide 25mm centre to centre length adjustment.

Whiteline strut tower bars not only makes your vehicle handle better they look great on the car as they feature premium polished alloy materials and powder coated end brackets. Quick release clamps KSB790 are also available and suit all Whiteline strut tower bar applications.

Miata NA 1989-1997 sway bars and strut tower bars/braces

Miata NB 1998-2005 sway bars, adjustable sway bar links, and strut tower bars/braces

Miata NC 2005+ sway bars and adjustable links

COMING SOON!

High quality NTN wheel bearing hub assembly for the front of your 1990-2004 Mazda Miata. Each hub assembly comes with wheel studs (stock length) and wheel bearings already pressed in. For non/ABS Miatas (ABS ring not included). Sold individually.

Axle nuts are considered one time use items. It is recommended to replace them whenever they are removed (ie. replacing wheel bearing or wheel studs). 20mm x 1.5 axle nut. Fits front or rear axles of 1990-1997 Miatas and only fits the front axle of 1999-2005 Miatas. Sold individually.

ARP wheel studs are designed for today's thick-centered, high-performance racing wheels. These chromoly steel studs are heat-treated and have a 190,000 psi tensile strength rating.

Specs: 2.75" extended wheel studs (front and rear). Press-in, 12mm x 1.5 Right Hand Thread, Set of 4 studs per package.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

Koyo 36mm: V-core racing radiators are 20-30% more efficient than factory radiators. All aluminum core brazed to polished aluminum end tanks.

Koyo 53mm: 53mm thick core provides extra cooling surface area. Koyo racing radiators are 20-30% more efficient than factory radiators. All aluminum core brazed to polished aluminum end tanks.

NOTE: Must use Koyo hyper radiator cap (sold separately). Factory Mazda radiator cap does not fit radiator. Fits manual transmission Miatas. Auto transmission cars must use an external trans cooler with these radiators.

Mishimoto 2-row: Two-row, 1.97" thick (90-97 model) or 2.05" (99-05 model), efficient brazed aluminum core. Full aluminum construction including durable, TIG-welded end tanks, increased fluid capacity and optimal heat dissipation. Ideal replacement for the failure-prone stock radiator. Includes 1.3 bar radiator cap and magnetic drain plug. Manual transmission only. Lifetime warranty.

Mishimoto X-Line: Three-row, 2.05" thick, premium radiator with 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency. Includes 1.3 bar radiator cap and magnetic drain plug. Manual transmission only. Lifetime warranty. Minor trimming required on OEM fan shroud for vehicles with A/C and/or aftermarket front sway bars.

Performance Aluminum Fan Shroud Kit: Direct fit. Works with factory style and Mishimoto radiators. Maximizes airflow. Includes two fans and all mounting hardware. Polished aluminum finish. Lifetime Warranty

High quality Gates radiator hose sets include upper, middle (where applicable), and lower hose. Long lasting and made of premium materials. Ships within 1-3 business days.

Silicone radiator hose sets include upper, middle (where applicable), and lower hose. Longer lasting made of high grade silicone. OEM replacement fit for quick and easy installation. Ships within 1-3 business days.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

Action Clutch kits are made and hand assembled here in the USA to provide a quality clutch kit that will outperform the competition! Clutch kits include pressure plate, clutch disc, bearings, and alignment tool.

- Stage 1: Up to 400 ft/lbs torque. Organic sprung disc, HD pressure plate, OEM-like clutch pedal feel. Heavy-duty street use.

- Stage 2: Up to 400 ft/lbs torque. Kevlar sprung disc, HD pressure plate, light clutch pedal with smooth engagement. Heavy duty street use and light track duty.

- Stage 3: Up to 475 ft/lbs torque. 6 puck Metallic sprung disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty street use and frequent drag/road/drift racing.

- Stage 4: Up to 475 ft/lbs torque. 6 puck Metallic rigid disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty track use.

- Stage 5: Up to 550 ft/lbs torque. 6 puck Iron sprung disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Stage 6: Up to 550 ft/lbs torque. 6 puck Iron rigid disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Ironman: Up to 600 ft/lbs torque. Sintered American iron rigid disc, dual clamp HD pressure plate, heavy with smooth engagement clutch pedal. Heavy-duty track use & race use.

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, driver feedback, and tire wear. We use a premium polyurethane formulated specifically for our company to provide minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. The quality of Powerflex products is visible the moment you open the box: premium polyurethanes, detailed moldings, and CNC-machined 304 stainless sleeves. Lube-holding grooves and knurls will ensure the supplied copper-based grease stays in place for extended squeak-free operation

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

Whiteline's "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

Fortune Auto 500 series (FA500-SE3P) are the best single adjustable system on the market at a very affordable price point. These are perfect for daily drivers that see occasional track use. Modular system - Upgradeable to 2-Way or 3-Way Canister.

SPECS: 10/6 kg spring rate, 24 way adjustable, pillowball uppermount, monotube construction, digressive Piston Technology. Custom spring rates, 4k to 24k, are available with Swift spring upgrade only. Contact us with your rates. Built to order. Ships within 5-8 weeks.

BC Racing is our most popular suspension package. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke.

SPECS: 8/6 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

Tein Street Basis (GSM56-11SS2) coilovers are great for daily driving and spirited driving for all types of drivers. Height adjustable only. SPECS: 5/4 kg spring rate, twin tube, upper mounts not included.

Tein Flex-Z (VSM56-C1SS3) inherits all the features and quality of STREET FLEX but the adoption of new platform allows for a lower price without comprimising quality. FLEX Z, of course, maintains the long-favored "Made in Yokohama" quality. c 7/5 kg spring rate, includes upper mounts w/rubber bushings, 16 way adjustable (simultaneous compression and rebound), and EDFC compatible.

Ships within 1-3 business days.

HKS Hipermax Max GT coilovers are specifically tuned for the Mazda RX-7 to provide the best handling possible while offering a comfortable ride on the street. This balance between ride comfort and performance makes these some of the most sought after coilovers on the market.

SPECS: 9/5 kg spring rate, mono tube design, 30 way damper adjustable, upper mounts with rubber bushings included.

Ships within 1-3 business days.

Improve the handling of your RX-8 with Racing Beat sway bars. Each front 32mm OD front tubular sway bar is supplied with replacement urethane bushings, bar clamps, Prothane grease and installation instructions. The set is matched with Racing Beat's adjustable rear 19mm sway bar. The rear bar comes complete with replacement urethane bushings, Prothane grease and installation instructions. Ships within 1-3 business days.

Racing Beat's sway bar end links are direct replacements for the stock Mazda end links. The Racing Beat sway bar end link set is easily adjustable and can be used on both standard height and lowered vehicles. Can be installed and adjusted using only simple hand tools. Includes one pair of end links with hardware and instructions. Fits 04-11 RX-8.

Whiteline Sway bars dramatically improve the grip, handling and performance of your vehicle. Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that's what it's all about. Installing bigger Whiteline Sway bars is still the best dollar for dollar handling improvement you can make.

Whiteline swaybar links are heavy duty and long lasting to ensure the maximum output of the swaybar for improved grip and better handling. Features heavy duty steel ball joint ends that adjust & rotate to any angular combination. Eliminate sway bar preload via the light weight aluminium bodies provide 25mm centre to centre length adjustment.

Tein S.TECH springs: 1.4" drop front and .7" rear drop. Spring rate: 3.7kg/mm front, 2.6kg/mm rear.

Tein H.TECH springs: 1" drop front and .3" rear drop. Spring rate: 3.2kg/mm front, 2.3kg/mm rear.

Springs fit all 2004-2011 Mazda RX-8s.

KONI’s Sport Damper Set & Springs is a complete solution that combines KONI Sport adjustable struts and shocks with H&R Sport Springs. Designed with the enthusiast in mind and to work together as a kit, this two-in-one solution from KONI improves road handling and maximizes agility. Lowers the vehicle by up to 1.5” (and still retain stock ride comfort).

NOTE: Includes front and rear shocks and springs. For 2008 RX-8 w/ OE Bilstein rear shocks, select 08-12 sport kit.

Specifically designed for the RX-8, KONI has a long-standing reputation in racing circles as a manufacturer of high performance, top quality shocks and struts. Ideally suited for use with lowering springs.

NOTE: Sold individually. For 2008 RX-8 w/ OE Bilstein rear shocks, select '08-12 (8240-1280Sport) shocks. These same 1280Sport shocks not intended for 2009-11 RX-8s equipped with OE Bilstein shocks. Front shocks externally adjustable. Rear shocks not externally adjustable.

Russell brake lines improve your braking performance for competition or every-day driving. Replacing the OE rubber hose with Russell brake hose reduces brake hose expansion for more consistent braking. Meets the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements.

Speed Bleeders have an internal check valve that lets air and old fluid out, then closes automatically, between pumps, preventing old fluid and air back in. 2 bleeders included per part number.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

EBC Redstuff: As EBC’s flagship street brake pad material for prestige and faster cars above 200BHP. EBC Redstuff ceramic, sets new standards in brake performance while keeping brake dust to a minimum. Perfect street performance pad for faster drivers.

Hawk HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most OE or standard replacement pads. Perfect for street use and autocross events.

Hawk HP Plus pads can take the heat at the track and get you home safely without changing your brake pads in and out. The high friction level of Hawk HP Plus pads makes them a superb upgrade for high performance streetcars used in competition, for high speed driving or that encounter repetitive heavy braking.

Combining the benefits of premium street brake pads with aggressive friction formulas suitable for light track days and autocross events, StopTech Street Performance Brake Pads meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions.

Designed to beat the challenges of high performance driving and severe duty brake demands. The short slot designs of Power Slot rotors run perpendicular to the vane to preserve rotor strength and are angled to use the rotors' direction of rotation to enhance performance. This makes them side-specific with left side (driver's) and right side (passenger's) rotors. Features black electrostatically applied finish which provides long lasting corrosion protection in the critical hat and cooling vane areas. These rotors represent one of the most cost-efficient performance brake upgrades offered in the market today.

High quality Koyo wheel bearings for the rear of your Mazda RX-8. Wheel bearings need to be replaced when the wheel hub is removed (ie. replacing wheel studs). Sold individually. Made in Japan.

Axle nuts are considered one time use items. It is recommended to replace them whenever they are removed (ie. replacing wheel bearing or wheel studs). Fits front or rear axles. Sold individually.

ARP wheel studs are designed for today's thick-centered, high-performance racing wheels. These chromoly steel studs are heat-treated and have a 190,000 psi tensile strength rating.

Specs: Press-in, 12mm x 1.5 Right Hand Thread, Set of 5 studs per package.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

Ichiba wheel spacers are made from an aluminum magnesium alloy making them incredibly strong and lightweight. V1 spacers come with 50mm wheel studs while V2 spacers come with pressed in studs which makes them very easy to install. NOTE: ARP 2.5" or 3.25" extended wheel studs are recommended when using V1 spacers. The included Ichiba studs may not be long enough to clear the spacer.

V1 specs: Bolt pattern 5x114.3, Hubcentric bore 67.1mm and thread type 12x1.5. Each box comes with two spacers (one pair) and ten 50mm wheel studs.

V2 specs: Bolt pattern 5x114.3, Hubcentric bore 67.1mm and thread type 12x1.5. Each box comes with two spacers (one pair).

Classic steering wheel hub. MOMO hub adapters exceed all safety standards including the ultra-strict German TUV. Compatible with Momo, Sparco, Mugen, Tenzo, and most other six bolt steering wheels.

NRG short hubs were designed to keep aftermarket steering wheels, specifically those installed with a quick release kit, from being too close to the driver. Fits all Mazda RX-7, RX-8, Miata, Protege, and 626.

The Generation 2.5 Quick Release has all the benefits of the Generation 2.0. The dual-spring mechanism is further assisted by the addition of a flared ring that makes it easier to release and is perfect for use with/without gloves on.

Next Generation in anti-theft security for vehicles with aftermarket quick release systems. These units are meant to quickly and easily disable the use of the steering hub by not allowing a steering wheel on the hub. Made from solid steel and utilizing the Ball-Lock design and key mechanism.

Racing Beat's high-gloss black gauge panel features three (3) openings that are suitable for use with a variety of 2-1/16" OD gauges. This panel has been designed to install easily into the RX-8's center console and replaces the cigarette ashtray.

For those looking for a complete package right out of the box, this gauge panel is available as a kit which includes 3 AutoMeter Sport-Comp gauges: water temperature (120-240 F), oil temperature (140-280 F), and oil pressure (0-200 PSI). Selected for their outstanding performance and interior-matching appearance, these high quality AutoMeter gauges look great during the daytime, and back-lit illuminated "red" at night - just like the stock gauges on the RX-8! Each kit includes the Racing Beat Oil Pressure and Temperature Adaptor, and the Water Temperature Adaptor.

Racing Beat designed the RX-8 Oil Cooler and Radiator stainless steel screens in an effort to provide additional protection to these vital components. Manual transmission RX-8s require 2 oil cooler screens. Automatic transmission RX-8s require only 1.

Authentic Takata tow straps for your race car. Available in green and black, with TAKATA Logo embroidered. Bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs).

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features: Carbon Fiber Construction, Wide Range of Adjustment, Billet Aluminum Bases for Easy Installation, and Mounting Hardware Included.

Broadway rear view mirrors help reduce blind spots and improve visibility. Clips on to factory rear view mirror.

Available as standard chrome finish or Type-A high reflective aluminum finish which is better suited for cars with tintted windows.

Racing Beat REVi intake offers performance improvements without sacrificing drivability. This intake system retains one of the important mesh screens to aid with the even distribution of airflow across the mass air sensor. The inclusion of this screen minimizes the possibility of "rough idle" issues that may occur if both stock screens are eliminated. Available as a kit (intake with air duct) or you can purchase the ram air duct and intake separately.

SPECS: OEM style air box assembly, custom-designed K&N air filter unit, aluminum mass air flow sensor tube, a tuned-length air inlet horn, and a nose-mounted ram air intake duct.

Genuine Mazda ignition coils are the best way to get your RX-8 running properly. Fits all 2004-2011 RX-8. Sold individually.

NGK Laser Iridium Resistor spark plugs. When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. Two leading and two trailing spark plugs per engine.

NGK spark plug wire sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability.

K&N Performance oil filters have become a favorite among consumers for its durability and easy removal. K&N oil filters use a resin impregnated cellulose filter media which allows for higher flow rates and outstanding filtration.

Bosch Premium oil filters have a filtering area that is up to 42% larger than conventional filters. Plus, the filter media is close to 30% thicker, and can screen out more harmful contaminants than a conventional filter. These filters have a silicone anti-drain back valve which ensures a supply of clean oil when you start your car.

Both of these filters fit all RX-8s. Each filter includes a new drain plug crush washer free of charge.

By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine. Features a powerful 5000 Gauss neodymium magnet. Black hard anodized aluminum. M14 x 1.5mm thread.

Koyo 36mm: Fits 2004-2008 manual transmission RX-8. V-core racing radiators are 20-30% more efficient than factory radiators. All aluminum core brazed to polished aluminum end tanks.

Koyo 48mm: Fits 2009-2008 manual transmission RX-8. 48mm thick core provides extra cooling surface area. Koyo racing radiators are 20-30% more efficient than factory radiators. All aluminum core brazed to polished aluminum end tanks.

NOTE: Auto transmission cars must use an external trans cooler with these radiators.

Mishimoto Mazda RX-8 radiator features a lightweight dual core, 100% brazed aluminum, and polished end tanks. Every Mishimoto Performance Radiator is a direct OEM fit, making installation effortless. Fits 2004-2008 manual transmission RX-8s.

Mishimoto dual fan shroud with fans is designed specifically for RX-8 radiators (original and aftermarket). Includes aluminum shroud with dual 12" slim fans. 2300 cfm total.

Mishimoto's 2004-2008 RX-8 stainless steel braided oil cooler hose kit replaces, and upgrades, the old stock rubber oil lines and steel fittings which severely corrode and degrade over time. The most frequent line to corrode, is located on the left hand side of the car near the front suspension assembly. Mishimoto's oil cooler hoses are available as a complete kit to replace all of the factory oil cooler hoses or as a single hose to replace the problematic, primary left hand side hose.

SPECS: Stainless steel braided hoses with aluminum fittings and gaskets for easy, bolt-on installation. Hoses are pre-made and are labeled for easy identification. Lifetime warranty.

Pettit Racing's aluminum AST replaces the factory plastic tank which commonly cracks and can cause severe engine damage. Fits all RX8 models from 2003 thru 2012.

SPEC C: Aluminm replacement for the factory plastic coolant tank.

SPEC B: Lets you setup a closed system by combining our recovery reservoir with our aluminum tank. In this configuration our aluminum tank works as an Air Separator Tank (AST), reducing entrained air in the system.

SPEC A: Similar to SPEC B but with the addition of a low level sensor to signal the RX8 dash warning light for low coolant.

Racing Beat's Water Temperature Sensor Adapter for the 2004-2011 RX-8 allows for easy installation of a sender unit for most popular aftermarket gauges (3/8-inch female pipe). The adapter mounts on the relatively easily accessible heater hose in the engine compartment and can be easily installed in just a few minutes. (This heater hose has continuous coolant flow-through during engine operation.

The TYPE II Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil temperature). Due to clearance and fitting restrictions, this adaptor is not suitable for use on the 1993-95 RX-7 and 2009-11 RX-8s. This adapter mounts immediately below the oil filter unit and includes a mounting O-ring and detailed installation instructions. Easily installs by simply removing the oil filter.

BRAND NEW made in Japan high quality water pump includes water pump gasket. We trust these pumps on all of our builds. Doesn't matter if it's a street car or a track car, we love these pumps!

SPECS: Stainless steel braided hoses with aluminum fittings and gaskets for easy, bolt-on installation. Hoses are pre-made and are labeled for easy identification. Lifetime warranty.

Motorad and OEM Mazda thermostats open at 180f (82c). Need a cooler thermostat? Mishimoto thermostats open at 169f (76c). Thermostats fit 2004-2011 Mazda RX-8.

Radiator hose sets include upper and lower hoses. Available as OEM Mazda (black) rubber hoses or silicone hoses (black, blue, red) from Racing Beat, Samco and Mishimoto.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

Action Clutch kits are made and hand assembled here in the USA to provide a quality clutch kit that will outperform the competition! Clutch kits include pressure plate, clutch disc, bearings, and alignment tool.

- Stage 1 (ACR-0996RX8): Up to 400 ft/lbs torque. Organic sprung disc, HD pressure plate, OEM-like clutch pedal feel. Heavy-duty street use.

- Stage 2 (ACR-0997RX8): Up to 400 ft/lbs torque. Kevlar sprung disc, HD pressure plate, light clutch pedal with smooth engagement. Heavy duty street use and light track duty.

- Stage 3 (ACR-0998RX8): Up to 475 ft/lbs torque. 6 puck Metallic sprung disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty street use and frequent drag/road/drift racing.

- Stage 4 (ACR-0999RX8): Up to 475 ft/lbs torque. 6 puck Metallic rigid disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty track use.

- Stage 5 (ACR-1000RX8): Up to 550 ft/lbs torque. 6 puck Iron sprung disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Stage 6 (ACR-1001RX8): Up to 550 ft/lbs torque. 6 puck Iron rigid disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Ironman (ACR-1002RX8): Up to 600 ft/lbs torque. Sintered American iron rigid disc, dual clamp HD pressure plate, heavy with smooth engagement clutch pedal. Heavy-duty track use & race use.

Quality U.S.A. made stainless steel braided clutch line for your 2004-11 Mazda RX-8. Replace the worn out original rubber hose for an improved clutch feel. We use, and trust, these on all of our cars. Fits all manual transmission 2004-11 Mazda RX-8.

Quality Japanese made clutch master and slave cylinders for your 2004-11 Mazda RX-8. Don't forget a steel braided clutch line to replace the ancient rubber line.

Genuine Mazda clutch fork with spring. It's a good idea to replace the fork, and pivot, when doing a clutch job if you don't know when the last time it was changed. Clutch fork pivot sold separately.

Racing Beat's REV8 "street legal", cat-back RX-8 exhaust system is the perfect replacement for your stock exhaust offering a real horsepower gain over your stock unit. This extremely popular RX-8 system consists of 304 stainless steel Racing Beat connecting-pipe, muffler canisters, tubing, flanges, and outlet tips. Bolt-on exhaust kits for easy installation.

Racing Beat's REN.V1 offers a full 304-stainless steel catalytic converter replacement pipe for RX-8 racing applications. This mandrel-bent 3" OD racing pipe, weighs 10 lbs and is a direct bolt-on replacement for the stock catalytic converter section.

Racing Beat's REN.V2 This 3" OD fully stainless steel catalytic converter replacement pipe with dual resonators for RX-8 racing applications is the perfect solution for a modest, quieter exhaust tone. Fitted with two (2) rotary-designed resonator units selected specifically for the RX-8 chassis. Each resonator is tightly packed with stainless steel wool for optimum sound supression and tone quality.

NOTE: Each race pipe is equipped with a sensor fitting for the oxygen sensor. (Note: Placement of the sensor in the pipe will cause the "check engine" light to be illuminated, but performance and engine systems for racing applications will not be affected.) Removal of the OE catalytic converter/presilencer section will result in a noticeably louder exhaust tone. Includes all required mounting hardware, gaskets, and installation instructions. Legal in California only for racing vehicles, which may never be used upon a highway.

Worn pillow ball bushings are the main source of clunking noises from the rear end of your 1993+ Mazda RX-7. World famous J-AUTO pillow balls are quiet, long lasting, stronger, and more precise than original Mazda pillow balls making them a great upgrade for street and race cars.

Easily rebuildable for a fraction of the cost of a new set, makes this the last pillow ball bushing kit you'll ever buy!

These RX-7s require 6 pillow balls: 2 pillow balls per rear lower control arm and 1 pillow ball per rear upper control arm. Compatible with original Mazda pillow ball dust seals (sold separately. 2 seals per bushing).

SPECS: High quality American teflon lined spherical bearings are self cleaning and self lubricating for long lasting, maintenance-free operation. Replaces Mazda part # FD01-26-220. Made locally in the U.S.A.

Available individually or as a kit of 6 pillow balls.

Get rid of that annoying clunking sound coming from the rear of your third generation RX-7 by replacing your worn out pillow ball bushings. These RX-7s require 6 pillow balls and 12 dust seals (2 per pillow ball): 2 pillow balls per rear lower control arm and 1 pillow ball per rear upper control arm. Mazda part # FD01-26-220.

Available individually or as a kit of 6 pillow balls with 12 dust boots. Ships within 1-3 business days.

J-AUTO's popular solid differential bushings replace the squishy, liquid filled factory bushings to improve power transfer to the ground. These solid bushings helps eliminate wheel hop and greatly reduces shifter movement. These are a must have for drag racing and drifting where dumping or kicking the clutch is done frequently. Road racing applications benefit by keeping the rear end as accurate as possible. Sold as a set of bushings enough for one car.

Genuine Mazda rear lower control arm bushing and stopper. Perfect addition to a SuperPro bushing kit. Two bushings and two rubber stoppers required per car. Sold individually. Ships within 1-3 business days.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

• Standard kit (KIT130K) includes bushings for: Front upper & lower control arms, steering rack, rear upper control arms, trailing arms, toe links, and differential.

• Bare kit: similar to the standard kit but without trailing arm and toe link bushings.

NOTE: Rear lower control arm bushings are not included and are not available from SuperPro. Before ordering sway bar bushings, please measure sway bar outer diameter. Each part number below includes bushings for the passenger and driver side. One part number per car required.

SuperPro ADJUSTABLE bushings have all the great features of the standard bushings with the ability to adjust more or less camber and caster with a simple and quick adjustment. These bushings feature an eccentric sleeve which give allow you to perfectly dial in your suspension settings giving you more adjustment than the factory hardware provides.

NOTE: Adjustable kit does not include SPF2680K rear upper control arm shock mount bushings.

Powerflex polyurethane bushing kits for 3rd generation 1993+ RX-7. These are sold as a kit to freshen up your chassis all at once or as individual pieces to replace bushings as needed.

• Standard kit: Includes bushings for steering rack, front & rear control arms, front & rear swaybars, differential, trailing arms, and toe links.

• Bare kit: Includes bushings for steering rack, front & rear control arms, and differential.

• Ford 8.8 kit: Includes bushings for steering rack, front & rear control arms, toe links, and trailing arms.

• Ford 8.8 base kit: Includes bushings for steering rack, front and rear control arms.

NOTE: Rear lower control arm bushings and rear shock mount bushings are only available in black. Sway bar bushings may not fit 1994+ RX-7s. Please measure before ordering. Each part number below includes bushings for the passenger and driver side. One part number per car required.

Powerflex black series - Ultimate performance polyurethane bushings offering the most precise and accurate alignment. Designed for the track and are ready to race. These bushings are 95A shore rating making them approximately 80% stiffer than stock rubber bushings.

• Black kit: Includes bushings for power steering rack, front & rear control arms, toe links, trailing arms, and differential.

• Black bare kit: Includes bushings for power steering rack, front and rear control arms, and differential.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

J-AUTO upgraded toe links and offset trailing arms directly replace your worn factory arms. Trailing arms are offset inward to clear wide/aggressive wheel setups. Toe links help fine tune your rear alignment settings.

SPECS: Aerospace grade aluminum bodies, high strength self lubricating heim joints with stainless steel bushings for weather resistance. Made in the USA.

Racers all over the world rely on our traction kits to stay ahead of the competition! This package includes your choice of differential bushings with our very popular toe links and trailing arms which feature high strength, self lubricating heim joints with stainless steel bushings for weather resistance.

Traction kits are available with your choice of differential bushings: SuperPro for dual purpose street cars, stiffer Powerflex black for more serious builds, or J-AUTO solid bushings for maximum performance.

This adjustable rear lower control arm & trailing arm package eliminates 4 of the 6 rear pillow balls while giving the car a solid, accurate rear end. Perfectly fine tune your rear suspension with the extra camber adjustment the control arms have to offer and clear wide wheels by moving the trailing arm inward. Combine this package with our toe links, polyurethane rear upper control arm & differential bushings to further reduce wheel hop.

NOTE: OEM and 3rd party trailing arms are not compatible with these control arms.

J-AUTO adjustable sway bar links fits all 1993+ Mazda RX-7 FD3S. Perfect upgrade for lowered RX-7s allowing you to easily adjust sway bar preload. Compatible with all OE style aftermarket sway bars/anti-roll bars. Made in the USA using high strength self lubricating chromoly rod ends. Sold as a pair. Replaces Mazda part # FD01-34-17X and FD01-34-19X.

Control arm bolts and ball joint boots. Ball joint boots include new retaining clip. Eccentric bolts have a built in cam plate at the bolt head but the second cam plate, at the nut side, is sold separately. Ball joint boots and hardware is sold individually. Usually ships within 1-3 business days.

Fortune Auto 500 series generation 7 (FA500-FD3S) are the best single adjustable system on the market at a very affordable price point. These are perfect for daily drivers that see occasional track use. Modular system - Upgradeable to 2-Way or 3-Way Canister.

SPECS: 10/8 kg spring rate, 24 way adjustable, pillowball uppermount, monotube construction, digressive Piston Technology. Custom spring rates, 4k to 24k, are available. Built to order. Ships within 5-8 weeks.

Fortune Auto 510 series generation 7 (FA510CFD-FD3S) Very popular with street cars that see frequent track use. The Concave Flow Digressive Piston allows for a Jekyll and Hyde personality. Lower spring rates can be stiffened up by using the wide damping range as an artificial spring rate, while higher spring rates feel much smoother. The large adjustment range contributes to a comfortable ride on the street and unyielding performance on the track, all with the twist of a single adjustment knob.

SPECS: 10/8 kg default spring rate, 24 way simultaneous rebound & compression adjustable, pillowball uppermount, monotube construction, ultra concave digressive Piston Technology. Amsoil Synthetic Shock Oil. Custom spring rates, 4k to 24k, are available. Built to order. Ships within 4 weeks.

BC Racing is our most popular coilover system for street cars and dual purpose (street & track) cars. BC Racing's BR Series offers the best of both worlds with ride height and damping adjustability making it a great coilover for street cars.

If road racing, or auto-x, is your thing, BC Racing's DS coilovers has you covered with a proprietary digressive piston design which offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses.

SPECS: 10/8 kg spring rate standard, 30 way adjustable, pillowball uppermount, monotube construction. Custom spring rates are available at no extra cost.

Street Advance coilover kit (GSM32-2USS2) provides a sporty ride feeling and aggressive stance, along with wide-range damping force adjustment using our new Advance Needle technology, giving the driver a much more noticeable feel in damping force change. SPECS: 10/8 kg spring rate, reuses factory upper mounts, twin tube internal construction, 16 way damper adjustable, and EDFC compatible.

Flex-Z coilover kit (VSM32-C1SS3) inherits all the features and quality of STREET FLEX but the adoption of new platform allows for a lower price without comprimising quality. FLEX Z, of course, maintains the long-favored "Made in Yokohama" quality. SPECS: 10/8 kg spring rate, 16 way adjustable, twin tube, upper mounts w/rubber bushings included., and EDFC compatible.

Mono Sport coilover kit (GSM32-71SS3) is designed to give drivers excellent performance on the circuit without compromising comfort on the street. SPECS: 12/12 kg spring rate, 16 way adjustable, mono tube, upper mounts w/rubber bushings included., and EDFC compatible.

Ships within 1-3 business days.

The Front Sway Bar Mount Brace Kit effectively stiffens the mounting points for the front sway bar, utilizing the steering rack mounts, to both optimize front suspension performance and reduce the possibility of cracking the front sway bar mounts as a result of repeated hard cornering. This easy-to-install component has been extremely popular over the years for good reason.. it just plain works!

This brace is designed to accommodate both the stock sway bar as well as virtually all aftermarket sway bars being offered. Features laser-cut end flanges and tubular steel bar stock and comes finished-coated with a durable, white powder coating. Ships within 1-3 business days.

Improve the handling of your RX-7 with our 31.75mm OD front Solid Sway Bar. Each front sway bar is supplied with our reinforced heavy duty mounting bracket and replacement urethane bushings. The stock connecting links are retained to ease installation. The set is matched with Racing Beat's Rear 19.05mm Sway Bar that is equipped with two mounting hole positions to allow you to fine-tune the handling of your RX-7. The rear bar comes complete with all mounting hardware, bushings, and instructions. Ships within 1-3 business days.

Genuine Mazda front and rear shock mounts and lower spring seats for 1993+ Mazda RX-7s FD3S. Lower spring seat fits front and/or rear shocks. Each shock mount uses three (3) 14mm head nuts. Everything sold individually. Ships within 1-3 business days.

Racing Beat springs: 3/4" drop front and 1.5" drop rear. Spring rate: 4.64kg/mm front, 3.79kg/mm rear.

Tein S.TECH springs: 1.4" drop front and 1.3" drop rear. Spring rate: 7.8kg/mm front, 5.8kg/mm rear.

Tein H.TECH springs: 0.8" drop front and 0.7" drop rear. Spring rate: 7kg/mm front, 5.2kg/mm rear.

Springs ship within 1-3 business days.

J-AUTO stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. Features an Abrasion Resistant Cover for maximum protection against chaffing. Includes front and rear brake lines, crush washers, and new banjo bolts. Made in USA.

Speed Bleeders have an internal check valve that lets air and old fluid out, then closes automatically, between pumps, preventing old fluid and air back in. 2 bleeders included per part number.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

Designed to beat the challenges of high performance driving and severe duty brake demands. The short slot designs of Stoptech rotors run perpendicular to the vane to preserve rotor strength and are angled to use the rotors' direction of rotation to enhance performance. This makes them side-specific with left side (driver's) and right side (passenger's) rotors. Features black electrostatically applied finish which provides long lasting corrosion protection in the critical hat and cooling vane areas. These rotors represent one of the most cost-efficient performance brake upgrades offered in the market today. Ships within 1-3 business days.

Brembo blank brake rotors have been the "go to" brake rotor replacement for many years on street cars and dual purpose cars. NOTE: Front brake rotors only.

EBC Redstuff: This performance ceramic street pad increases stopping power and keeps dust to a minum. Perfect brake pad for faster street cars.

EBC Yellowstuff: Provides a high level of grip when pads are cold and maintains it without fade even under the hottest operating temperatures. Perfect for track days, drifting, autocross, and fast street cars.

NOTE: All brake pads listed fit 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Hawk HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most OE or standard replacement pads. Perfect for street use and autocross events. Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Hawk HP Plus pads can take the heat at the track and get you home safely without changing your brake pads in and out. The high friction level of Hawk HP Plus pads makes them a superb upgrade for high performance streetcars used in competition, for high speed driving or that encounter repetitive heavy braking.Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Combining the benefits of premium street brake pads with aggressive friction formulas suitable for light track days and autocross events, StopTech Street Performance Brake Pads meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions.Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Premium wheel bearing hub assembly for the front of your third generation RX-7. Each hub comes standard with stock length wheel studs pressed in. Need longer wheel studs? Available with extended studs pressed in. Hubs sold individually. Genuine Mazda wheel hubs made in Japan. Premium wheel hubs made in U.S.A.

Economy wheel bearing hub assembly for the front of your third generation RX-7. Each hub comes standard with stock length wheel studs pressed in. Need longer wheel studs? Available with extended studs pressed in. Hubs sold individually.

Premium Koyo wheel bearings are made in Japan. Economy centric wheel bearings are made in China. Rear wheel bearings need to be replaced anytime the wheel hub is removed (ie. replacing wheel studs). Sold individually.

Genuine Mazda rear wheel hub. Each hub comes standard with stock length wheel studs pressed in. Need longer wheel studs? Available with extended studs pressed in. Hubs sold individually. NOTE: This is just the wheel hub. Bearing not included.

Genuine Mazda axle nuts, front wheel bearing dust caps, and rear wheel bearing snap rings. Axle nuts are considered one time use items. It is recommended to replace them whenever they are removed (ie. replacing wheel bearing or wheel studs). Front wheel bearing dust caps protect your wheel bearings from water, dust, road grime, and everything else that can harm your bearings. Sold individually. Ships within 1-3 business days.

ARP wheel studs are designed for today's thick-centered, high-performance racing wheels. These chromoly steel studs are heat-treated and have a 190,000 psi tensile strength rating.

Specs: Press-in, 12mm x 1.5 Right Hand Thread, Set of 5 studs per package.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels. Ships within 1-3 business days.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels. Ships within 1-3 business days.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

Ichiba wheel spacers are made from an aluminum magnesium alloy making them incredibly strong and lightweight. V1 spacers come with 50mm wheel studs while V2 spacers come with pressed in studs which makes them very easy to install. NOTE: ARP 2.5" or 3.25" extended wheel studs are recommended when using V1 spacers. The included Ichiba studs may not be long enough to clear the spacer. Ships within 1-3 business days.

V1 specs: Bolt pattern 5x114.3, Hubcentric bore 67.1mm and thread type 12x1.5. Each box comes with two spacers (one pair) and ten 50mm wheel studs.

V2 specs: Bolt pattern 5x114.3, Hubcentric bore 67.1mm and thread type 12x1.5. Each box comes with two spacers (one pair).

High quality direct fit OEM replacement inner and outer tie rod ends. Designed to consistently produce just the right amount of preload to provide proper steering effort. Tie rods and lock washers sold individually.
NOTE: RX-7s made from 1993 to 4/1994 will have fine thread inner tie rods while those made after 4/1994 should have coarse thread inner tie rods. The difference in fine/coarse thread is at the steering rack end. Outer tie rod ends fit all 1993+ RX-7s. Please verify thread before ordering.

High quality, direct fit OE replacement power steering rack bellows. Each bellow is sold individually. Left is U.S. driver side and right is U.S. passenger side. We recommend replacing these whenever the inner tie rods are worked on.

Simply the best steering wheel hub for your RX-7. The standard size hub features an SRS harness adapter to keep the air bag light from flashing constantly. These hubs connect to the factory clock spring so the horn button works without modifying anything. Short hub does not have SRS plug due to it's short size. Compatible with Momo steering wheels. Nardi wheels must use adapter #010038 if bolted directly to the hub. Made in Japan.

Classic steering wheel hub. MOMO hub adapters exceed all safety standards including the ultra-strict German TUV. Compatible with Momo, Sparco, Mugen, Tenzo, and most other six bolt steering wheels. Ships within 1-3 business days.

The Generation 2.5 Quick Release has all the benefits of the Generation 2.0. The dual-spring mechanism is further assisted by the addition of a flared ring that makes it easier to release and is perfect for use with/without gloves on. Ships within 1-3 business days.

Next Generation in anti-theft security for vehicles with aftermarket quick release systems. These units are meant to quickly and easily disable the use of the steering hub by not allowing a steering wheel on the hub. Made from solid steel and utilizing the Ball-Lock design and key mechanism. Ships within 1-3 business days.

Authentic Takata tow straps for your race car. Available in green and black, with TAKATA Logo embroidered. Bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs). Ships within 1-3 business days.

Headlight cover flew off on the highway? These OEM Mazda headlight covers are primered and are ready to paint. Headlight covers fit all 1993+ third generation RX-7s. Usually ships within 1-3 business days.

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features: Carbon Fiber Construction, Wide Range of Adjustment, Billet Aluminum Bases for Easy Installation, and Mounting Hardware Included. Ships within 1-3 business days.

Original Mazda R1 front spoiler fits all third generation RX-7s. Great bolt on upgrade for base or touring models that didnt come with this front spoiler. Ships within 1-3 business days.

Broadway rear view mirrors help reduce blind spots and improve visibility. Clips on to factory rear view mirror.

Available as standard chrome finish or Type-A high reflective aluminum finish which is better suited for cars with tintted windows. Ships within 1-3 business days.

For over 15 years, Pettit Racing's Cool Charge III intercooler kit has proven to be a reliable and efficient choice for countless customers around the world. Its high efficiency 12"x17" aluminum core provides the lowest charge-air temperature gains of any system. Works with or without the factory air pump and all twin turbo setups and most single turbo setups. Simple, bolt-on installation (no cutting or modifications) can be done in 1-2 hours.

NOTE: This intercooler system was designed for RX-7s with a relocated battery, aftermarket intake system (Pettit Trak Pro intake system recommended), and an aftermarket throttle body elbow such as the Greddy elbow. Please be aware that a little more work will be required to install this intercooler system if your engine bay is completely stock.

REQUIRED ITEMS NOT INCLUDED: Trak Pro intake systems come in two versions: STREET for cars with an air pump and RACE for cars without the air pump. Battery relocation kit includes stainless steel hold down hardware, terminated cables, instructions and everything necessary to install your battery in the rear bins. Greddy aluminum elbow replaces the factory plastic throttle body elbow.

Greddy's v-mount intercooler kit is considered to be the best bolt-on intercooler on the market! This kit includes everything you need to install a v-mount intercooler, radiator, & intake system on your twin-turbo and single turbo FD RX-7.

Includes intercooler, radiator, air intakes (twin turbo only), throttle body elbow, air separator tank (AST), ducting, intake piping, a/c piping (nippon denso system only), couplers, brackets, and all hardware needed for installation.

'93-95 twin-turbo setups with factory US-spec y-pipe use part number 12040704.

'99 spec turbo y-pipe with twin-turbos use part number 12040705.

Single turbo engine setups use part number 12040703.

CAN NOT BE SOLD IN AND DOES NOT SHIP TO CALIFORNIA. NO EXCEPTIONS. Do not order if you're in California. Your order will be canceled and you will be charged Paypal fees.

Greddy aluminum throttle body elbow upgrade replaces the factory plastic throttle body elbow for better airflow and throttle response. We recommend upgrading the throttle body elbow when upgrading the intercooler and piping. Very popular with cars running Pettit Racing cool charge intercooler.

IRP polyurethane engine mounts are great performance replacements for your worn out factory mounts. Features a lower poly bushing to reduce vibration. Includes grade 10.9 hardware. Sold as a pair.

Our most popular intake for 3rd generation RX-7s. The dual funnel Power Intake kit evolved from the highly successful Super Intake. Utilizing an upper and lower funnel, the Power Intake reduces air turbulence within the filter and creates smooth air flow into the throttle body. Replaces factory airbox. Ships within 1-3 business days.

CAN NOT BE SOLD IN AND DOES NOT SHIP TO CALIFORNIA. NO EXCEPTIONS. Do not order if you're in California. Your order will be canceled and you will be charged Paypal fees.

Keep your fuel system performing it's best with a new fuel filter. Choose from a Genuine Mazda fuel filter or aftermarket fuel filter.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. Available as standard copper or platinum tipped spark plugs. Two leading #7 and two trailing #9 spark plugs per engine. Four #9 spark plugs can be used on engines pushing out more power.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability.

High quality Bando serpentine belts are made in the USA using EPDM rubber which adheres to OEM specifications making them more heat resistant and longer lasting. We trust these belts on our own dual purpose RX-7 and on customer cars.

K&N Performance oil filters have become a favorite among consumers for its durability and easy removal. K&N oil filters use a resin impregnated cellulose filter media which allows for higher flow rates and outstanding filtration.

Bosch Premium oil filters have a filtering area that is up to 42% larger than conventional filters. Plus, the filter media is close to 30% thicker, and can screen out more harmful contaminants than a conventional filter. These filters have a silicone anti-drain back valve which ensures a supply of clean oil when you start your car.

Both of these filters fit all RX-7s. Each filter includes a new drain plug crush washer free of charge.

By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine. Features a powerful 5000 Gauss neodymium magnet. Black hard anodized aluminum. M14 x 1.5mm thread.

Koyo 48mm racing radiator: Features a 48mm thick, all aluminum core brazed to polished aluminum end tanks for a show quality finish. Koyo uses state of the art Nocolok Brazing Furnace to bond all of the radiator brackets, headers, tubes, and fins, creating high quality "indestructible" radiator.

Koyo N-FLOW: Features Koyorad's new 48mm "HH" Series radiator core to maximize heat transfer. This design cools more efficiently by allowing the coolant to remain in the radiator for a longer period of time therefore transfering more heat to the surrounding air. Built with a robust 48mm core, N-Flow is engineered for the serious performance tuner. Increased capacity means better cooling reserve when you need it.

NOTE: Designed for manual transmission RX-7. Auto transmission cars must use an external trans cooler with these radiators. Ships within 1-3 business days.

ROTARY ENGINE: Mishimoto Mazda RX-7 radiator features a lightweight single core, 100% brazed aluminum, and polished end tanks. Every Mishimoto Performance Radiator is a direct OEM fit, making installation effortless. Includes magnetic drain plug. Perfect upgrade from the stock radiator. Fits manual transmission 1993+ RX-7s. Automatic RX-7s need an external transmission cooler with this radiator.

LS-SWAP: Mishimoto LS-SWAP features two-rows (2.17" thick), efficient brazed aluminum core for increased fluid capacity and optimal heat dissipation. Includes 1.3 bar radiator cap and magnetic drain plug.

LS-SWAP DUAL FAN SHROUD: Mishimoto dual fan shroud is designed specifically for LS-SWAP radiators. Includes aluminum shroud with dual 12" slim fans. 2300 cfm total.

Pettit Racing's aluminum AST replaces the factory plastic tank which commonly cracks and can cause severe engine damage. Features swirl pot action to effectively remove any air bubbles circulating with the coolant (improving heat transfer). It has a billet cap neck and hose nipples, machined from 6061 T6 aluminum then beautifully tig welded in the USA to the highest standards by some of the best welders on the planet.

BRAND NEW made in Japan high quality water pump includes water pump gasket. We trust this pump on our own dual purpose RX-7 and on customer cars. Fits 1993-2002 Mazda RX-7 13B-REW engines.

Motorad and OEM Mazda thermostats open at 180f (82c). Need a cooler thermostat? Mishimoto thermostats open at 154.4f (68c). Thermostats include gasket and fit 1989-2002 Mazda RX-7 13B engines.

Radiator hose sets include upper and lower hose. Available as OEM Mazda (black) rubber hoses or silicone hoses (black, blue, red) from Racing Beat, Samco and Mishimoto. Ships within 1-3 business days.

High quality Bando serpentine belts are made in the USA using EPDM rubber which adheres to OEM specifications making them more heat resistant and longer lasting. We trust these belts on our own dual purpose RX-7 and on customer cars.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

J-AUTO solid differential bushings replaces the squishy, liquid filled factory bushings to improve power transfer to the ground. These solid bushings helps eliminate wheel hop and greatly reduces shifter movement. These are a must have for drag racing and drifting where dumping or kicking the clutch is done frequently. Road racing applications benefit by keeping the rear end as accurate as possible. Sold as a set of bushings enough for one car.

Quality Japanese made clutch master and slave cylinders for your 1993+ Mazda RX-7.

Genuine Mazda clutch fork. Broken clutch fork? Don't buy a used one that will crack and leave you stranded again. It's a good idea to replace the fork when doing a clutch job if you don't know when the last time it was changed. Replacement bolts are available individually. Two bolts are needed per clutch fork.

Quality U.S.A. made stainless steel braided clutch line for your 1993+ Mazda RX-7. Replace the worn out original rubber hose for an improved clutch feel. We use, and trust, these on all of our cars. Fits all manual transmission 1993+ Mazda RX-7.

Pettit Racing's fires the starter with full battery voltage every time! This complete kit has detailed instructions, is easily installed in 30 min. or less, and can be used on any RX-7 experiencing starting issues.

Driveshaft shop FD RX-7 Twin Turbo 3" Aluminum shaft. This 1-piece driveshaft is lighter than the stock driveshaft, but is also considerbly more torsional. A steel shaft can torsionally twist 5-7 degrees, where an aluminum shaft can twist as much as 15-20 degrees. This means a smoother ride and better response. Comes completely assembled, balanced and ready to install.

Action Clutch kits are made and hand assembled here in the USA to provide a quality clutch kit that will outperform the competition! Clutch kits include pressure plate, clutch disc, bearings, and alignment tool.

- Stage 1 (ACR-0989): Up to 400 ft/lbs torque. Organic sprung disc, HD pressure plate, OEM-like clutch pedal feel. Heavy-duty street use.

- Stage 2 (ACR-0990): Up to 400 ft/lbs torque. Kevlar sprung disc, HD pressure plate, light clutch pedal with smooth engagement. Heavy duty street use and light track duty.

- Stage 3 (ACR-0991): Up to 475 ft/lbs torque. 6 puck Metallic sprung disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty street use and frequent drag/road/drift racing.

- Stage 4 (ACR-0992): Up to 475 ft/lbs torque. 6 puck Metallic rigid disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty track use.

- Stage 5 (ACR-0993): Up to 550 ft/lbs torque. 6 puck Iron sprung disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Stage 6 (ACR-0994): Up to 550 ft/lbs torque. 6 puck Iron rigid disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Ironman (ACR-0995): Up to 600 ft/lbs torque. Sintered American iron rigid disc, dual clamp HD pressure plate, heavy with smooth engagement clutch pedal. Heavy-duty track use & race use.

Action Clutch 7.25in racing clutches are designed for racing applications that put down serious power ratings. They feature two discs that are a mix of ceramic and metallic formulated materials. Our discs provide a higher heat capacity through their increased mass. The great thing about these discs is the engagement characteristics- They offer a smoother engagement than any other disc in the market.

SPECS: 800 ft/lbs torque, 1,200 hp rating. Aluminum hat, two floater plates, two .250" thick race discs, 4140 lightweight chromoly flywheel. New bearings and alignment tool included.

HKS 3" turbo downpipe is the most popular downpipe for the FD RX-7 due to it's excellet fitment and built quality. Replaces the factory pre-cat to significantly reduce underhood temperatures and increase exhaust flow for a bump in power. NOTE: Works with 13BREW twin turbos only. Does not fit single turbo setups. NOT CARB LEGAL. CANNOT BE SOLD IN CALIFORNIA

Racing Beat's world famous exhaust systems maximize performance while maintaining a deep and mellow exhaust note. Normal driving produces a mellow deep tone, but jump on the throttle and these systems come alive with an even deeper, throaty sound. These cat back systems are 100% bolt on for easy installation. Racing Beat's 3" race pipe replaces the primary catalytic converter for increased flow on racing applications. NOTE: race pipe not recommended on cars with stock ECUS.

Replace those leaky exhaust gaskets to regain any lost horsepower, quiet the car down, and to avoid exhaust fumes from entering the cabin. Engine to exhaust manifold gaskets are genuine Mazda parts for long life (two needed per engine). 3" inner diameter exhaust gaskets are perfect for all 3 inch exhaust systems. All gaskets sold individually.

Revel medalion touring exhaust system keeps noise levels down with a nice deep tone that's perfect for street use.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness. This makes them an ideal choice for cars that are used for both normal road driving and track days.

Increases caster .6 to .75 degrees. Includes bushings for both front lower control arms. Fits turbo and non-turbo 1986-1991 RX-7s. Rear control arm bushings not included/available.

Racing Beat Toe Eliminators replaces the stock rubber joint and provides a perceptible improvement in feedback to the driver. There is no longer a need to modulate inputs based on the constantly fluctuating elastic joint output. The kit consists of two (2) rigid plastic sleeves and two (2) steel bushings which should be installed with the aid of a hydraulic press or a large vise. No re-alignment is necessary after installation. Ships within 1-3 business days.

Original Mazda rubber bushings are perfect for those who want to refresh their suspension to exact OEM specification and keep their car stock.

NOTE: Power steering rack bushings sold as a pair (order one per car). All other bushings are sold individually (2 of each required per car). Ships within 1-3 business days.

ENERGY SUSPENSION's HYPER-FLEX ™ is performance polyurethane that delivers an amazing amount of PERFORMANCE to any vehicle that runs with it. Proven on the race track as well as the street, on and off-road, under the most demanding conditions.

We recommend Black Energy Suspension bushings becuase they're Graphite Impregnated which serves to help self lubricate the bushings for smooth, long lasting operation. The Red parts do not have this characteristic. Fits turbo and non-turbo 1986-1991 RX-7s. Ships within 1-3 business days.

These adjustable toe links (lateral rods) are 100% bolt on. No drilling or modifying your car in any way required to install these. Fits all 1986-1991 RX-7s. Not recommended for use with polyurethane rear lower control arm bushings due to possible binding issues. Ships within 1-3 business days.

Adjustable camber bar. Easy bolt-in replacement for stock rigid rear subframe link. Allows adjustment of rear camber while bar is installed. Fits all 1986-1991 RX-7s. Not recommended for use on cars with solid or derlin differential bushings. Ships within 1-3 business days.

Specs (Toe links & camber bar): Aircraft grade billet aluminum body with high quality 3 piece motorsports-grade rod ends. Rod ends have self-lubricating, Teflon injected bearings to handle the rigors of repeated track use. Assembled by hand in-house using only American made materials.

BC Racing is our most popular suspension package. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke.

SPECS: 8/6 kg spring rate, 30 way adjustable, pillowball uppermount, monotube construction.

Fortune Auto 500 series generation 7 (FA500-FC3S) are the best single adjustable system on the market at a very affordable price point. These are perfect for daily drivers that see occasional track use. Modular system - Upgradeable to 2-Way or 3-Way Canister.

SPECS: 8/6 kg spring rate, 24 way adjustable, pillowball uppermount, monotube construction, digressive Piston Technology. Custom spring rates, 4k to 24k, are available with Swift spring upgrade only. Contact us with your rates. Built to order. Ships within 5-8 weeks.

Fortune Auto 510 series generation 7 (FA510CFD-FC3S) Very popular with street cars that see frequent track use. The Concave Flow Digressive Piston allows for a Jekyll and Hyde personality. Lower spring rates can be stiffened up by using the wide damping range as an artificial spring rate, while higher spring rates feel much smoother. The large adjustment range contributes to a comfortable ride on the street and unyielding performance on the track, all with the twist of a single adjustment knob.

SPECS: 8/6 kg default spring rate, 24 way simultaneous rebound & compression adjustable, pillowball uppermount, monotube construction, ultra concave digressive Piston Technology. Amsoil Synthetic Shock Oil. Custom spring rates, 4k to 24k, are available. Built to order. Ships within 4 weeks.

Improve the handling of your RX-7 with Racing Beat sway bars. Each front 1.125" OD front solid sway bar is supplied with reinforced heavy duty mounting brackets and replacement urethane bushings. The set is matched with Racing Beat's Rear .625" sway bar. The rear bar comes complete with all mounting hardware, bushings, and instructions. Ships within 1-3 business days.

Racing Beat's popular endlinks are a direct replacement for the RX-7 factory links. Easily adjust sway bar preload. Perfect for daily drivers or track cars.

Each set contains two links for one sway bar (front or rear) and includes all required mounting hardware and instructions. These links have been designed for use with the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars. Ships within 1-3 business days.

Tein S. Tech springs: 1" drop front and rear. Spring rate: 2.1kg/mm front, 2.4kg/mm rear. Fits all 86-91 RX-7s.

Racing Beat springs: 1" drop front and rear. Spring rate: 2.79kg/mm front, 2.29kg/mm rear. Fits 86-91 RX-7s except convertible.

Racing Beat vert springs: Half inch drop front and rear. Spring rate: 2.48kg/mm front, 2.39kg/mm rear. Fits 86-91 convertible.

Springs usually ship within 1-3 business days.

When you want adjustable high performance control, you want KYB AGX Adjustable Gas shock absorbers. KYB AGX shock absorbers allow easy adjustment of the shock damping rate to tune the vehicle’s performance to meet the needs of the street, strip or track. KYB AGX Adjustable Gas shock absorbers are externally adjustable, so there is no need to disconnect or remove anything to change settings. Ships within 1-3 business days.

J-AUTO stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. Features an Abrasion Resistant Cover for maximum protection against chaffing. Includes front and rear brake lines, crush washers, and new banjo bolts. Made in USA. FITS 4 PISTON CALIPER CARS ONLY.

Speed Bleeders have an internal check valve that lets air and old fluid out, then closes automatically, between pumps, preventing old fluid and air back in. 2 bleeders included per part number.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

It is very important to replace your hardware when replacing pads or shoes for best performance and safety. Springs wear out; other parts gets rusty and don't operate smoothly or properly. Replace with new for smooth and safe operation. Each kit includes hardware for both driver and passenger sides. Ships within 1-3 business days.

Designed to beat the challenges of high performance driving and severe duty brake demands. The short slot designs of Power Slot rotors run perpendicular to the vane to preserve rotor strength and are angled to use the rotors' direction of rotation to enhance performance. This makes them side-specific with left side (driver's) and right side (passenger's) rotors. Features black electrostatically applied finish which provides long lasting corrosion protection in the critical hat and cooling vane areas. These rotors represent one of the most cost-efficient performance brake upgrades offered in the market today. NOTE: Fits RX-7s with 4 piston front calipers only. Ships within 1-3 business days.

EBC Redstuff: This performance ceramic street pad increases stopping power and keeps dust to a minum. Perfect brake pad for faster street cars.

EBC Yellowstuff: Provides a high level of grip when pads are cold and maintains it without fade even under the hottest operating temperatures. Perfect for track days, drifting, autocross, and fast street cars.

NOTE: All brake pads listed fit 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Hawk HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most OE or standard replacement pads. Perfect for street use and autocross events. Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Hawk HP Plus pads can take the heat at the track and get you home safely without changing your brake pads in and out. The high friction level of Hawk HP Plus pads makes them a superb upgrade for high performance streetcars used in competition, for high speed driving or that encounter repetitive heavy braking.Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

Combining the benefits of premium street brake pads with aggressive friction formulas suitable for light track days and autocross events, StopTech Street Performance Brake Pads meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions.Fits 4 piston front calipers and vented rear brakes only. Ships within 1-3 business days.

High quality replacement wheel bearings for your second generation RX-7. Front Koyo wheel bearings made in Japan. Rear Timken bearings made in USA. Sold individually.

New wheel bearing seals are required when changing wheel bearings. Made in Japan. Sold individually. One seal per wheel hub.

Axle nuts are considered one time use items. It is recommended to replace them whenever they are removed (ie. replacing wheel bearing or wheel studs). Genuine Mazda axle nuts. Sold individually. Ships within 1-3 business days.

ARP wheel studs are designed for today's thick-centered, high-performance racing wheels. These chromoly steel studs are heat-treated and have a 190,000 psi tensile strength rating.

Specs: Press in, 12mm x 1.5 Right Hand Thread, Set of 5 studs per package.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels. Ships within 1-3 business days.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels. Ships within 1-3 business days.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

Ichiba wheel spacers are made from an aluminum magnesium alloy making them incredibly strong and lightweight. V1 spacers come with 50mm wheel studs while V2 spacers come with pressed in studs which makes them very easy to install. NOTE: ARP 2.5" or 3.25" extended wheel studs are recommended when using V1 spacers. The included Ichiba studs may not be long enough to clear the spacer. Ships within 1-3 business days.

V1 specs: Bolt pattern 5x114.3, Hubcentric bore 59.5mm and thread type 12x1.5. Each box comes with two spacers (one pair) and ten 50mm wheel studs.

V2 specs: Bolt pattern 5x114.3, Hubcentric bore 59.5mm and thread type 12x1.5. Each box comes with two spacers (one pair).

High quality OEM replacement inner and outer tie rods. Designed to consistently produce just the right amount of preload to provide proper steering effort. For power steering racks only. Sold individually.

High quality, direct fit OE replacement power steering rack boot kit. Includes zip ties. Each boot sold individually.

Classic steering wheel hub. MOMO hub adapters exceed all safety standards including the ultra-strict German TUV. Compatible with Momo, Sparco, Mugen, Tenzo, and most other six bolt steering wheels. Ships within 1-3 business days.

The Generation 2.5 Quick Release has all the benefits of the Generation 2.0. The dual-spring mechanism is further assisted by the addition of a flared ring that makes it easier to release and is perfect for use with/without gloves on. Ships within 1-3 business days.

Next Generation in anti-theft security for vehicles with aftermarket quick release systems. These units are meant to quickly and easily disable the use of the steering hub by not allowing a steering wheel on the hub. Made from solid steel and utilizing the Ball-Lock design and key mechanism. Ships within 1-3 business days.

Holley Retrobight LED headlights offer modern day lighting technology with nice even light distribution in an easy plug and play package. This is simply the best light upgrade at this price point. Available in three different color temperatures: Modern White 5700K, Classic White 3000K, and Euro Yellow. Sold as a pair of headlights.

Authentic Takata tow straps for your race car. Available in green and black, with TAKATA Logo embroidered. Bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs). Ships within 1-3 business days.

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features: Carbon Fiber Construction, Wide Range of Adjustment, Billet Aluminum Bases for Easy Installation, and Mounting Hardware Included. Ships within 1-3 business days.

The dual funnel Power Intake kit evolved from the highly successful Super Intake. Utilizing an upper and lower funnel, the Power Intake reduces air turbulence within the filter and creates smooth air flow into the throttle body. Replaces factory airbox. Fits Series 5 1989-1992 RX-7s. Ships within 1-3 business days.

CAN NOT BE SOLD IN AND DOES NOT SHIP TO CALIFORNIA. NO EXCEPTIONS. Do not order if you're in California. Your order will be canceled and you will be charged Paypal fees.

Get some extra horses with a K&N rechargable filter or just replace that dirty/clogged filter with an OE spec filter to help your engine breather better. Panel air filters fit the original Mazda air box and are drop in filter replacements. Ships within 1-3 business days.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. Available as standard copper or platinum tipped spark plugs. Two leading #7 and two trailing #9 spark plugs per engine. Four #9 spark plugs can be used on engines pushing out more power.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability.

K&N Performance oil filters have become a favorite among consumers for its durability and easy removal. K&N oil filters use a resin impregnated cellulose filter media which allows for higher flow rates and outstanding filtration.

Bosch Premium oil filters have a filtering area that is up to 42% larger than conventional filters. Plus, the filter media is close to 30% thicker, and can screen out more harmful contaminants than a conventional filter. These filters have a silicone anti-drain back valve which ensures a supply of clean oil when you start your car.

Both of these filters fit all RX-7s. Each filter includes a new drain plug crush washer free of charge.

By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine. Features a powerful 5000 Gauss neodymium magnet. Black hard anodized aluminum. M14 x 1.5mm thread.

Koyo N-FLOW: Allows for a double or triple pass radiator. This design cools more efficiently by allowing the coolant to remain in the radiator for a longer period of time therefore transfering more heat to the surrounding air. Built with a robust 53mm core, the R-Core Series is engineered for the serious performance tuner. Increased capacity means better cooling reserve when you need it.

Koyo 53mm racing radiator: Features a 53mm (2 1/16 in) thick, all aluminum core brazed to polished aluminum end tanks for a show quality finish. Koyo uses state of the art Nocolok Brazing Furnace to bond all of the radiator brackets, headers, tubes, and fins, creating high quality "indestructible" radiator.

NOTE: Fits manual transmission Turbo and non-turbo RX-7. Must use Koyo hyper radiator cap (sold separately). Factory Mazda radiator cap does not fit radiator. Ships within 1-3 business days.

Radiator hose sets include upper and lower hose. Available as OEM Mazda (black) rubber hoses or silicone hoses (black, blue, red) from Samco and Racing Beat. Ships within 1-3 business days.

Motorad and OEM Mazda thermostats open at 180f (82c). Need a cooler thermostat? Mishimoto thermostats open at 154.4f (68c). Thermostats include gasket. Fits 1989-1992 Series 5 Mazda RX-7 13B engines. Ships within 1-3 business days.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

Driveshaft shop 3" Aluminum shaft. This 1-piece driveshaft is lighter than the stock driveshaft, but is also considerbly more torsional. A steel shaft can torsionally twist 5-7 degrees, where an aluminum shaft can twist as much as 15-20 degrees. This means a smoother ride and better response. Comes completely assembled, balanced and ready to install.

Action Clutch kits are made and hand assembled here in the USA to provide a quality clutch kit that will outperform the competition! Clutch kits include pressure plate, clutch disc, bearings, and alignment tool.

- Stage 1: Up to 400 ft/lbs torque. Organic sprung disc, HD pressure plate, OEM-like clutch pedal feel. Heavy-duty street use.

- Stage 2: Up to 400 ft/lbs torque. Kevlar sprung disc, HD pressure plate, light clutch pedal with smooth engagement. Heavy duty street use and light track duty.

- Stage 3: Up to 475 ft/lbs torque. 6 puck Metallic sprung disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty street use and frequent drag/road/drift racing.

- Stage 4: Up to 475 ft/lbs torque. 6 puck Metallic rigid disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty track use.

- Stage 5: Up to 550 ft/lbs torque. 6 puck Iron sprung disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Stage 6: Up to 550 ft/lbs torque. 6 puck Iron rigid disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Ironman: Up to 600 ft/lbs torque. Sintered American iron rigid disc, dual clamp HD pressure plate, heavy with smooth engagement clutch pedal. Heavy-duty track use & race use.

Action Clutch 7.25in racing clutches are designed for racing applications that put down serious power ratings. They feature two discs that are a mix of ceramic and metallic formulated materials. Our discs provide a higher heat capacity through their increased mass. The great thing about these discs is the engagement characteristics- They offer a smoother engagement than any other disc in the market.

SPECS: 800 ft/lbs torque, 1,200 hp rating. Aluminum hat, two floater plates, two .250" thick race discs, 4140 lightweight chromoly flywheel. New bearings and alignment tool included.

Quality U.S.A. made stainless steel braided clutch line for your second generation 86-91 Mazda RX-7. Replace the worn out original rubber hose for an improved clutch feel. We use, and trust, these on all of our cars. Fits all manual transmission 86-91 Mazda RX-7.

Quality Japanese made clutch master and slave cylinders for your FC Mazda RX-7. Clutch master cylinder fits all second generation RX-7s, turbo & non-turbo, and includes a fluid reservoir. Don't forget a steel braided clutch line to replace the ancient rubber line.

Genuine Mazda clutch fork with spring. It's a good idea to replace the fork, and pivot, when doing a clutch job if you don't know when the last time it was changed. New clutch fork boots are available to replace the crusty original one.

Racing Beat's world famous exhaust systems maximize performance while maintaining a deep and mellow exhaust note. Normal driving produces a mellow deep tone, but jump on the throttle and these systems come alive with an even deeper, throaty sound. These cat back systems are 100% bolt on for easy installation. Fits turbo and non turbo RX-7s. Individual components are available if you don't want the complete system.

Racing Beat's world famous exhaust headers and presilencers are the best upgrade, for your money, to increase horsepower. NOTE: You need to use a presilencer, or equivalent length race pipe, for your Racing Beat header to be 100% bolt on. Header alone will not bolt onto the factory cat.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required unless otherwise noted.

The BC Racing BR Series is our most popular suspension package offering 30 levels of damping adjustment and height adjustment to get the look you want. SPECS: 5/3.5 kg default spring rates. Ships within 1-3 business days.

J-AUTO rear lower control arms are a direct bolt-on replacement to the worn factory upper and lower arms. Our rear upper control arms are offset for maximum spring clearance when used with coilover systems such as BC Racing's 1st gen kit. Improves driving feedback and eliminates wheel hop when you install both upper and lower control arms. SPECS: Aerospace grade aluminum bodies, high strength self lubricating heim joints with stainless steel bushings for weather resistance. Made in the USA.

Improve the handling of your RX-7 with Racing Beat sway bars. Each front 1.125" OD front solid sway bar is supplied with reinforced heavy duty mounting brackets and replacement urethane bushings. The set is matched with Racing Beat's Rear .75" OD solid bar which features a fully-adjustable set of bar arms to allow a nearly limitless range of adjustability.. The rear bar comes complete with mounting hardware, high-density urethane mounting bushings, bushing lubricant, replacement endlinks and urethane bushings, retaining clamps, and installation instructions. Ships within 1-3 business days.

Techno Toy Tuning (T3) GTX2 adjustable front lower control arms and adjustable TC/caster rods bolt right on to your first generation RX-7 SA22 and FB. Strong enough for rally use but quiet enough for the street. Easily adjust caster, bumpsteer (up to 23mm bumpsteer reduction), and lengthen the arms up to 30mm longer than the factory arms for a wider track. Lower arms have 5 sway bar link mounting points and 4 TC rod mounting points. Includes front lower control arms, TC rods, and sway bar links.

Techno Toy Tuning (T3) adjustable front lower control arms bolt right on to your first generation RX-7 SA22 and FB. Strong enough for rally use but quiet enough for the street. Length adjustable from .25" below factory to 1.5" over factory for a wider track. 3 settings for the swaybar droplink and TC Rods (for widening the track of the car). Fully Fabricated steel lower control arms (No used OEM parts) using heavy gauge steel for added strength over factory arms.

Features AE86 ball joints whice are stronger, the threaded nose is 14mm instead of the 12mm size of the RX7, the AE86 style ball joint are pressed in AND use a snap ring (vs the RX7 ones that are pressed in only) and the final advantage is that the slightly longer ball joint gives about 1/2" of built in roll center correction to the lower control arms.

Techno Toy Tuning (T3) adjustable front tension control rods. These TC rods will provide incredible steering feedback, zero caster deflection and EASY caster adjustment and alignment tuning. Right and Left hand threaded threads, making them super easy to adjust caster without removing them from the car.

Techno Toy Tuning (T3) roll center adjusters, or bump steer spacers, are designed to get rid of that pesky bump steer on your lowered vehicle. The alignment sleeves are solid milled into the unit, so they will not get lost or come off. Features a larger alignment ring for the center of the unit, to provide even more shear protection than other RCAs on the market. These RCAs will NOT move or become mis-aligned, no matter how hard you drive. Comes with all new mounting hardware - four new grade 8.8 bolts and lock washers.

Techno Toy Tuning (T3) drop mount/traction brackets allows you to lower the position of the rear shock eye for more travel on lowered cars. They also work as "traction brackets" with 2 positions for the rear lower control arms to help with axle wrap on low RX7's. Helps improve traction on lowered or high HP cars. Bolts on without modification.

Techno Toy Tuning (T3) panhard bar conversion helps eliminate slop in the rear end and helps eliminate snap oversteer. 1st gen RX-7s are known to be a handful at the limit due to the factory watts link design which tends to cause binding issues causing snap oversteer at the limit. Direct bolt on, adjustable on car, and very easy to install. This is one of the easiest and simplest upgrades you can make to your RX7.

J-AUTO's five piece stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. Features an Abrasion Resistant Cover for maximum protection against chaffing. Includes front and rear brake lines, and crush washers. Made in USA.

Designed to beat the challenges of high performance driving and severe duty brake demands. The short slot designs of Power Slot rotors run perpendicular to the vane to preserve rotor strength and are angled to use the rotors' direction of rotation to enhance performance. This makes them side-specific with left side (driver's) and right side (passenger's) rotors. Features black electrostatically applied finish which provides long lasting corrosion protection in the critical hat and cooling vane areas. These rotors represent one of the most cost-efficient performance brake upgrades offered in the market today. Ships within 1-3 business days.

Hawk HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most OE or standard replacement pads. Perfect for street use and autocross events.

Hawk HP Plus pads can take the heat at the track and get you home safely without changing your brake pads in and out. The high friction level of Hawk HP Plus pads makes them a superb upgrade for high performance streetcars used in competition, for high speed driving or that encounter repetitive heavy braking.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

Many builds require extra room for turbo's and such and leave no room for the brake booster. Some people like the firmer feel of manual brakes when racing. Others yet have found it nearly impossible to find a replacement booster in their local. This brake booster elimator solves all three problems!

You may need to replace your wheel bearing if you hear a grinding or "howling" noise that changes with the speed of the car with the noise remaining whether you are coasting or under power. When the opportunity arises, it is best to replace relatively inexpensive wear items like wheel seals which will ensure dirt stays out and grease in your bearings, thus ensuring a longer service life. Bearings and seals are sold individually.

Note: Series 2: 1979-1983 RX-7   -   Series 3: 1984-1985 RX-7.

ARP wheel studs are designed for today's thick-centered, high-performance racing wheels. These chromoly steel studs are heat-treated and have a 190,000 psi tensile strength rating.

NOTE: Fits 1984-1985 GSL-SE models with wheel studs. Does not fit earlier RX-7s with lug bolts.

Specs: Press-in, 12mm x 1.5 Right Hand Thread, Set of 5 studs per package.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

As your car's mileage increases, it is best to check the steering and suspension for excessive play due to wear. Additionally, if you are experiencing abnormal tire wear, or steering wheel vibration at speed you should also check these components for possible replacement. Sold individually.

Classic steering wheel hub. MOMO hub adapters exceed all safety standards including the ultra-strict German TUV. Compatible with Momo, Sparco, Mugen, Tenzo, and most other six bolt steering wheels.

NRG short hubs were designed to keep aftermarket steering wheels, specifically those installed with a quick release kit, from being too close to the driver. Fits all Mazda RX-7, RX-8, Miata, Protege, and 626.

The Generation 2.5 Quick Release has all the benefits of the Generation 2.0. The dual-spring mechanism is further assisted by the addition of a flared ring that makes it easier to release and is perfect for use with/without gloves on.

Next Generation in anti-theft security for vehicles with aftermarket quick release systems. These units are meant to quickly and easily disable the use of the steering hub by not allowing a steering wheel on the hub. Made from solid steel and utilizing the Ball-Lock design and key mechanism.

Holley Retrobight LED headlights offer modern day lighting technology with nice even light distribution in an easy plug and play package. This is simply the best light upgrade at this price point. Available in three different color temperatures: Modern White 5700K, Classic White 3000K, and Euro Yellow. Sold as a pair of headlights.

Authentic Takata tow straps for your race car. Available in green and black, with TAKATA Logo embroidered. Bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs).

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features: Carbon Fiber Construction, Wide Range of Adjustment, Billet Aluminum Bases for Easy Installation, and Mounting Hardware Included.

Koyo 48mm racing radiator: All aluminum core brazed to polished aluminum end tanks for a show quality finish. Koyo uses state of the art Nocolok Brazing Furnace to bond all of the radiator brackets, headers, tubes, and fins, creating high quality "indestructible" radiator.

NOTE: Fits manual transmission cars. Must use a separate transmission cooler for automatics. Must use Koyo hyper radiator cap (sold separately). Factory Mazda radiator cap does not fit radiator. Ships within 1-3 business days.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

Action Clutch kits are made and hand assembled here in the USA to provide a quality clutch kit that will outperform the competition! Clutch kits include pressure plate, clutch disc, bearings, and alignment tool.

- Stage 1: Up to 400 ft/lbs torque. Organic sprung disc, HD pressure plate, OEM-like clutch pedal feel. Heavy-duty street use.

- Stage 2: Up to 400 ft/lbs torque. Kevlar sprung disc, HD pressure plate, light clutch pedal with smooth engagement. Heavy duty street use and light track duty.

- Stage 3: Up to 475 ft/lbs torque. 6 puck Metallic sprung disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty street use and frequent drag/road/drift racing.

- Stage 4: Up to 475 ft/lbs torque. 6 puck Metallic rigid disc (also available in 4 puck), HD pressure plate, light/medium clutch pedal with aggressive engagement. Heavy-duty track use.

- Stage 5: Up to 550 ft/lbs torque. 6 puck Iron sprung disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Stage 6: Up to 550 ft/lbs torque. 6 puck Iron rigid disc (also available in 4 puck), dual clamp HD pressure plate, medium/heavy clutch pedal with aggressive engagement. Heavy-duty track use & race use.

- Ironman: Up to 600 ft/lbs torque. Sintered American iron rigid disc, dual clamp HD pressure plate, heavy with smooth engagement clutch pedal. Heavy-duty track use & race use.

Genuine Mazda clutch fork with spring. It's a good idea to replace the fork, and pivot, when doing a clutch job if you don't know when the last time it was changed. New clutch fork boots are available to replace the crusty original one.

Racing Beat's complete exhaust systems offer excellent horsepower gains when you require a muffled exhaust system. The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical. Thanks to the combined sound supression efforts of the Power-Pulse Presilencer and the Power Pulse Main muffler, the exhaust noise is only slightly higher than stock, with a very low, pleasant character.

INCLUDES: Header/Collector, a Power-Pulse Presilencer, Power Pulse main muffler, and all necessary gaskets and hardware where available.

Designed specifically to optimize the performance benefit of a ported rotary engine, this RX-7 exhaust system will provide the maximum power output possible from an aftermarket RX-7 exhaust system. While louder than the stock system, the dual resonated center section offers maximum exhaust gas flow and scavenging while reducing sound output to a modest level.

The Long Primary system typically adds 5% or more horsepower over a standard Short Primary system on a street ported engine, especially at higher RPMs. This system can also be used on non-ported engines with good results. This is intended for racing applications, there is no provision for an oxygen sensor on this system.

INCLUDES: Road Race Header, the Street Port Center Section, a high flow Power Pulse Main muffler, and all necessary gaskets and hardware where available.

Racing Beat Header is designed for a bolt-on installation, when used with the appropriate Racing Beat Power Pulse Presilencer in all 1981-83 RX-7s. The combination of this RX-7 header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use on racing applications, along with any intermediate pieces of tubing. An outlet gasket is included but engine-to-header gasket is sold separately.

Racing Beat's ROAD RACE header is the first step in building a serious racing exhaust system. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system.

Racing Beat's Power Pulse RX-7 muffler is a large diameter high-flow muffler designed for stock and "street-ported" engines. Designed and manufactured by Racing Beat, our RX-7 Power Pulse muffler features a large diameter inlet tube that feeds into a high capacity stainless steel muffler canister. Dual outlet tubes directly exhaust gases through twin polished stainless steel muffler tips. Muffler gaskets are not included and are sold separately. We strongly recommend a new hanger kit when installing a replacement muffler on any older chassis.

In response to numerous requests from customers demanding a very low restriction“street capable” muffler, Racing Beat now offers the Universal Power Pulse PR-Extreme RX-7 Muffler with a 2.75" OD internal perforated core design to meet the performance demands of high-horsepower ported rotary engines. The Power Pulse PR-Extreme RX-7 Muffler is compatible with all 1979-85 RX-7 muffler rear mounting positions and retains the factory stock appearance. This is a universal muffler that requires exhaust pipe fabrication to make it fit.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required unless otherwise noted.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required unless otherwise noted.

The BC Racing BR Series is our most popular suspension package offering 30 levels of damping adjustment and height adjustment to get the look you want. Upgrade to Swift springs for better performance!

SPECS: 5/4 kg default spring rates. Built to order. Ships within 2-5 weeks.

Whiteline Sway bars dramatically improve the grip, handling and performance of your vehicle. Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that's what it's all about. Installing bigger Whiteline Sway bars is still the best dollar for dollar handling improvement you can make.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required.

NOTE: 1972 up to 8/1973 RX-3 use 40mm spring front eye bushings. RX-3 after this build date use 35mm front eye bushing.

The BC Racing BR Series is our most popular suspension package offering 30 levels of damping adjustment and height adjustment to get the look you want.

SPECS: Fits RX-3 and 808 coupes. Rear shocks DO NOT FIT RX-3 WAGON or 808 WAGON. 5 kg default spring front rates. Coilover kits are made to order with a 4 week lead time.

Whiteline Sway bars dramatically improve the grip, handling and performance of your vehicle. Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that's what it's all about. Installing bigger Whiteline Sway bars is still the best dollar for dollar handling improvement you can make.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required unless otherwise noted.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

SuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners with no increase in vibration or ride harshness.

NOTE: Each part number below includes bushings for the passenger and driver side. One part number per car required unless otherwise noted.

ATE Type 200: Dry boiling point 536F. Wet boiling point 388F. 1 liter/1,000ml bottle.

MOTUL RBF600: Dry boiling point 593F. Wet boiling point 420F. 1 pint/500ml bottle.

Stoptech STR-600: Dry boiling point 594F. Wet boiling point 404F. 1 pint/500ml bottle.

Stoptech STR-660: Dry boiling point 622F. Wet boiling point 404F. 1 pint/500ml bottle.

J-AUTO gift certificates are the perfect gift all year round! Available as low as $5.00. Gift certificates must be used towards any purchase made here on www.J-AUTO.net. Gift certificates are non-refundable and must be redeemed through this website.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. Available as standard copper or platinum tipped spark plugs. Two leading #7 and two trailing #9 spark plugs per engine. Four #9 spark plugs can be used on engines pushing out more power.

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability.

K&N Performance oil filters have become a favorite among consumers for its durability and easy removal. K&N oil filters use a resin impregnated cellulose filter media which allows for higher flow rates and outstanding filtration.

Bosch Premium oil filters have a filtering area that is up to 42% larger than conventional filters. Plus, the filter media is close to 30% thicker, and can screen out more harmful contaminants than a conventional filter. These filters have a silicone anti-drain back valve which ensures a supply of clean oil when you start your car.

Both of these filters fit all RX-7s. Each filter includes a new drain plug crush washer free of charge.

By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine. Features a powerful 5000 Gauss neodymium magnet. Black hard anodized aluminum. M14 x 1.5mm thread.

Red Line Water Wetter provides corrosion and rust protection for modern aluminum and cast iron cooling systems. This unique additive reduces coolant temperatures by as much as 20 degrees F. It can be used in plain water to provide much better heat transfer properties and protection than glycol-based antifreeze, or added to new or used antifreeze to fortify inhibitors and reduce foaming.

Muteki lug nuts are compact enough, in size and shape, to fit most wheels with small lug holes. These lug nuts are made from cold-forged 1008 steel making them strong and lightweight. Contains 20 lug nuts and one key. NOTE: Will not work with some factory wheels.

Muteki SR48 Lug Nuts come in a set of 20 with key adapter. Manufactured from chrome vanadium, each lug weighs in at a mere 2oz! Muteki SR48 lug nuts allow for an extremely thin lug nut so you don't scratch your wheels. Their open ended design is perfect for short or extended wheel studs. NOTE: Will not work with some factory wheels.

Protect your wheels with a matching set of Muteki SR48 wheel locks. Each set contains 4 wheel locks and wheel lock key to deter wheel theft.

The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on the market! The award-winning patented DirectDigital™ technology we use is faster and more accurate than common “UEGO” gauges and is now more affordable! In addition, the gauge features a water resistant casing, interchangeable faceplates and bezels, and 2 fully programmable linear analog outputs for use with aftermarket engine managements systems and dataloggers!

Specs: 52mm gauge w/built in controller, included wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc). All gauges ship within 2-5 business days.

Defi Red Racer gauges are standalone and don't require an external control unit. Advanced Stepping Motor features full sweep 270 degree movement with smooth, accurate, and precise movement. Gauge and sensor are electrical, meaning the sensor is remote mounted. Red LED illumination for a crisp and vibrant display and red pointer for high visibility during day and night. Adjustable outer position bezel allows the user to set a warning point manually. Outer plastic pod and metal mounting pedestal is included.

All gauges ship within 2-5 business days.

Takata Drift II: manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt features a center push button release buckle and our shoulder belt ASM system to prevent submarining. 2" shoulder belts and 2" lap belts with comfort padding.

Snap-on: Attaches to eye bolts at the lap belts.

Bolt-on: Bolts to existing factory mounting points for front lap belts. Shoulder belts mount to rear lap belt mountnig points or wrapped around roll cage or harness bar.

Features: 4 point harness, 2" Shoulders, 2" Lap belts with Pull-up adjusters, Street Legal.

Takata Drift III: manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt features a center push button release buckle and our shoulder belt ASM system to prevent submarining. 3" shoulder belts and 2" lap belts with comfort padding.

Snap-on: Attaches to eye bolts at the lap belts.

Bolt-on: Bolts to existing factory mounting points for front lap belts. Shoulder belts mount to rear lap belt mountnig points or wrapped around roll cage or harness bar.

Features: 4 point harness, 3" Shoulders, 2" Lap belts with Pull-down adjusters, Street Legal.

Authentic Takata tow straps for your race car. Available in green and black, with TAKATA Logo embroidered. Bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs).

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features: Carbon Fiber Construction, Wide Range of Adjustment, Billet Aluminum Bases for Easy Installation, and Mounting Hardware Included.

Broadway rear view mirrors help reduce blind spots and improve visibility. Clips on to factory rear view mirror.

Available as standard chrome finish or Type-A high reflective aluminum finish which is better suited for cars with tintted windows.

The best car air freshener in Japan is now available here in the U.S. in a refilable fresh fruit scent that lasts up to two months. Strength can be controlled through a slider bar. Approximately 4.5" wide, 3" high, 3/4" thick.

Terms and Conditions

All orders placed with J-AUTO (phone, internet/web & e-mail) constitute the acknowledgement and acceptance of all conditions listed on J-AUTO's Price List and all conditions listed below. All parts shall remain the property of J-AUTO until paid for in full. All orders shipped to a California address must pay state, county & city sales tax as required by the California State Board of Equalization. In the event that an order placed on the web does not calculate sales tax and the order is being shipped to a California address, J-AUTO will calculate the sales tax when the order is processed and call or e-mail the customer with the new amount.

All prices, materials, design, color, contents included with a product, and product specifications are subject to change without notice. Some product images may be shown with optional items that are sold separately. Depending on the product(s) ordered and the destination of the order, certain shipping services may not be available.

All prices listed in our website, advertisement and/or catalog do not include shipping & handling charges. All prices and descriptions are subject to change without notice. Upon the placement of your order the total cost will be provided including shipping and handling charges. Prices do not include any additional taxes or duty that may apply on entry to your country, city or state.

In the event a product is listed at an incorrect price or with incorrect information due to typographical error or error in pricing or product information received from the supplier or manufacturer, J-AUTO shall have the right to refuse or cancel any order placed for product listed at the incorrect price.

All engine modification components, except those that are exempt, have been designed and are intended for off-highway application. These components are legal in California for racing vehicles only, which may never be used on public roads and highways. Federal and many state laws prohibit the removal, modification, or rendering inoperable of any device or element of design affecting vehicle emission or safety in a vehicle used on public highways. Violation of such laws may subject the owner or user to a fine or penalty. Installation of this part may void the vehicle's manufacturer warranty coverage, if any, on your vehicle. Vehicles modified by the use of performance parts may no longer be lawfully used on public highways. Further, all engine parts, headlight units, light bulbs and electrical components are sold AS IS without any warranty and may not be returned. User assumes all cost and risks associated with these and other import items.

Returns or exchanges are accepted within 7 calendar days from the date of receipt of merchandise with no exception and are subject to a 15% (fifteen percent) restocking fee. Shipping & handling costs to and from J-AUTO are non-refundable and will be prepaid for by the customer. Returns or refunds are not accepted on computers, electrical units, bulbs, lighting accessories, special/custom orders, and discontinued items. All authorized return merchandise must be unused and in its original saleable packaging. No returns or exchanges will be allowed if the item shows signs of having been installed, scratched, damaged and/or modified. All international/foreign orders are final, no returns will be accepted.

A photo copy of your invoice showing the invoice number must accompany your return along with a written explanation and a contact phone number where we may be able to reach you. It is the customer's responsibility to properly and securely repack item(s), with sufficient packaging material, to prevent damage. We cannot give credit or refund on a returned package that got damaged due to insufficient packing. All hardware & accessories included in the original package needs to be returned or the customer will be charged. All returned items needs to be insured (in case of loss or damage) and we recommend the customer get a tracking number to track the shipment.

All special order items must be paid in full at the time of order. All special orders and custom orders will be processed in the most timely and efficient manner possible. However, J-AUTO will not be held responsible for delays above and beyond its control. No cancellations, refunds, or exchanges on special order items or custom order items.

Get in touch with us